With the latest updated cold jet machines the new cleaning technology named Dry ice blasting has become popular among the industrialists worldwide. These dry ice blasters adopts a variety of advanced technologies including Nanotechnologic insulation, high frequency vibrator and abrasive tank.
Working of Dry ice Blast Cleaning Machine
When kinetic force is made use by other cleaning techniques, dry ice blast cleaning machine make use of additional two forces for removing contaminants. One is Thermal Shock Effect caused by the temperature (-109°F / -78.9°C) of the dry ice making the contaminant to embrittle and shrink. The other one is Thermal-Kinetic Effect where the dry ice particles sublimate instantly and return to the natural gas state due to combined impact energy dissipation and extremely rapid heat transfer between the pellet and the surface. The Kinetic Energy Effect is created by the pellets. Dry ice is actually accelerated by compressed air through nozzles at supersonic speeds to break the bond between the substrate and the contaminant. A micro-explosion occurs in the situation lifting thermally-fractured coating particles from the substrate as the CO2 gas expands outward along the surface. Particles are carried away from the surface with a lifting force.
Common facts about Dry Ice Blast Cleaning with Cold Jet Machines.
Safe cleaning method– Dry ice blast cleaning is one of those safe cleaning methods which is made use by industrial, commercial and residential environments. The pelletized dry is ice non-toxic, non-abrasive media as it sublimates into a harmless carbon dioxide gas leaving no residue. Since it simply disappears in room temperature no ventilators or specialized breathing equipment are required while doing the action. The only one demerit of using dry ice for cleaning is that the pellets are extremely cold (-109.3° F/-78.5°C). It is also safe for cleaning technicians, employees, and any bystanders.
Used for cleaning electrical equipment– Since Dry ice is the solid form of Carbon Dioxide gas it is odorless and tasteless. It doesn’t conduct electricity as it is a gas. Because of this reason it can be used to clean electrical transformers, generators, gauges, wiring, circuit boards and control panels. It is safe, and effective without causing arcing, shorting or disruption of electrical service.
Dry ice blasting is affordable and saves money– compared to other traditional cleaning methods dry ice blasting is affordable. If your worker is highly skilled, motivated and well-trained then your time is also saved. With the right equipment and tools, proper surface cleaning can be done effectively. The equipment is safe and easier to maintain. It saves your money by taking less time, less material, zero disposal of secondary waste etc.
Dirt during cleaning can be disposed– the oil, grease dirt produced will fall to the floor which can be vacuumed up for disposal. Since dry ice blast-cleaning process in cold jet do not use chemicals or harsh cleaning solvents it is much easier to clean the grease and oil dirt by various cleaning techniques. In most cases they can be mopped up.
Used to clean food prepared areas effectively– Dry ice blasting is used by some blasting specialists in the food industry too. Cleaning using dry ice in the food prepared areas is approved by EPA and FDA. You can use it in food service, sanitizing food service equipment, and for cleaning food manufacturing and processing plants.
Main Benefits of Dry Ice Blast Cleaning with Cold jet
- No Water, Grit or Chemicals
- It is safe around electrical connections
- Reduces downtime for maintenance
- Reduces lost production
- Cleaning can be done with minimal disassembly
- It is environment friendly
- Saves money, time, labor, and materials
- No exposure to any corrosive solvents
- Eliminates secondary waste
- Cleans without etching or damaging surfaces
- Zero damage to sensitive machinery
- No drying time
- Improved results are produced
- Reduce the production burden of your machine service intervals
- Reduce overall cleaning time
- Is safe, courteous and conscientious
Factors to be kept in mind while doing Dry ice cleaning
You should know that it is always better to start your dry ice blasting project at low pressure. This ensures the feasibility of your project. According to the contaminant you should adapt the size of the ice and the type of nozzle. The whole treatment is soft since the dry ice is much less dense than any other abrasive. With various types of nozzles every nook and corner can be cleaned with ease. You can see that your equipment works more efficiently and potential leakages like hydraulics are revealed to you.
As the top Dry ice supplier we recommend every industry to make use of the advantages of Dry ice blasting. It is better than any other traditional cleaning methods. Even delicate operations like cleaning cards Electronics, or electrical cabinets, to the heaviest services such as stripping industrial furnaces can be done efficiently. If you are in need of Dry Ice and cold jet machine for cleaning purposes do contact us immediately.
